▍1. 基于 Philips 公司的 ARM
基于 Philips 公司的 ARM-7 使用之 uC/OS-II 作业系统,此例程是移植于 LPC-2138 上的应用,不同于一般的 Porting 其最主要是加入了支援 OS_View 观察器功能,于 IAR EWARM V4.41A 工程编译,而 uC/OS 版本为 2.83-Based on the Philips company
基于 Philips 公司的 ARM-7 使用之 uC/OS-II 作业系统,此例程是移植于 LPC-2138 上的应用,不同于一般的 Porting 其最主要是加入了支援 OS_View 观察器功能,于 IAR EWARM V4.41A 工程编译,而 uC/OS 版本为 2.83-Based on the Philips company
uCOS-III V3.03.01 uCOS-II V2.92.07在STM32F2移植
最初学习单片机的时候,由于条件,没有硬件,就只好用Proteus仿真,其实效果蛮不错的。到后来的高版本,直接可以支持ARM。相当不错的工具。此源码是其对uCOS在ARM上运行的仿真。-MCU when the initial study, due to conditions, not hardware, they can use Proteus simulation, in fact, quite a good effect. Later versions of the high direct support ARM. Pretty good tool. This source is its uCOS running in ARM emulation.
参考网上的提供的代码,我把uCosII移植到MSP430f149上,分三个任务,分别是485通讯,键盘扫描,LED显示,可供参考!-online reference provided by the code, and I uCosII MSP430f149 transplant, in three tasks, namely, 485, keyboard scan, LED display, for example!
52arm_ucos_ii_new.最新版本UCOSII程序-52arm_ucos_ii_new. The latest version UCOSII procedures
这是一个操作系统中的读者优先算法的实现绝对正确-This is an operating system as a priority readers algorithm to achieve absolutely correct
UCOS/II for ICCAVR - The version of UCOS/II is 2.04 - the original port was done by Ole Saether for the IAR compiler. Jens E. Holtegaard ported one version using ICCAVR. Joerg Meyer did another port (using Jens port as a start?). This is basically Joerg s port plus a little bit of changes and documentation by me. - YOU MUST DOWNLOAD THE MAIN PART OF THE UCOS/II FROM THE UCOS/II WEBSITE http://www.ucos-ii.com . The supplied project file assumes the portable source is in the ..source directory. - Joerg has written couple document showing the stack frames etc. but it is in German :-) They are included in this directory. - The Timer2 overflow interrupt is used for Timer Tick. If you want to change that, modify os_cpu_c.c and os_cpu_a.s - I have tested this using ATMega103 with and without external RAM using AVR Studio simulator. See test1.c test program. Both Code Compressed (PRO) and STD versions have been tested. -UCOS/II for ICCA
针对STM32F103的UCOS移植,支持RealView MAK及IAR开发环境-UCOS for the STM32F103 transplantation, support for RealView MAK and IAR development environment
uC_OS-II在Keil C上的移植代码,注意此代码使用与KeilV6.20及其以上版本。-Keil C portal of uC/OS-II source code. Note: this code is for Keil V6.20 or later version.
PWM 调占空比 ucos LPC2132-PWM duty cycle adjusted ucos LPC2132
PDIUSBD12的固件程序可能对开发USB1.1的兄弟有用-PDIUSBD12 firmware may USB1.1 brother on the development of useful
ucGUI3.90a没有MemDev这是从3.24向上移植的-ucGUI3.90a This is not MemDev upward from 3.24 transplant
UCOS的源码,它的硬件基础是80186,只要你的电脑只要是INTEL的CPU,就可以在你的电脑上面正常运行,你也可以把它移植到你的MCU,所以这个源码是研究UCOS的最佳选择。这个例子是UCOS实现各个任务管理。-UCOS the source, and its hardware is based on 80,186, as long as your computer as long as it is INTEL" s CPU, on your computer in the normal operation of the above, you can transfer it to your MCU, so the source is to examine the UCOS the best choice. UCOS the realization of this example is the management of various tasks.
应用micro c OS ii 到LPC21xx 系列微处理器-micro C OS II transplant to Philips LPC21xx source code.
现在ucGUI在嵌入式上面使用得越来越广泛,提供翻译的中文版的编程手册,方便大家进行程序编写。-now embedded in the above ucGUI increasingly widespread use, provide translation of the Chinese version of the manual programming to facilitate the procedures for the preparation.
S3C44B0下的ucos程序。并包含了udp/ip网络通讯同能。-S3C44B0 under the procedures OUT. And contains udp/ip network communication can be the same.