-
OLED_Init
使用SSD1306或者SH1106驱动芯片的OLED程序初始化代码。(OLED init for the driver chip SSD1306 or SH1106.)
- 2020-12-30 21:09:00下载
- 积分：1
-
CT
说明： 双路输出控制器”具有信号输出时间设定、 输出信号占空比调整、 当前输出通道及时
间显示、系统工作参数存储、串口通讯及 LED 指示等功能。 “双路输出控制器”通过串口完
成信号输出时间设定功能；通过 EEPROM 完成系统工作参数存储功能；通过按键完成输出通
道切换、 输出信号占空比调整及停止信号输出功能； 系统硬件电路主要由 MCU 控制单元、独
立按键、 LCD 显示单元、 串口通讯单元、 EEPROM 数据存储单元和 LED 指示单元组成(Dual output controller has the signal output time setting, adjust the duty cycle of the output signal, the current output channel in time
Between display, system operating parameters are stored, serial communications and LED indicator. Dual Output Controller through serial END
A signal output time setting function complete system operating parameters via EEPROM memory function complete output pass through the key
Channel switching, adjust the duty cycle of the output signal and the stop signal output function the system hardware circuit is mainly controlled by the MCU unit, alone
Li buttons, LCD display unit, serial communication unit, EEPROM data storage unit and LED indication units)
- 2015-03-10 20:14:34下载
- 积分：1
-
CAN
stm32微控制器CAN总线收发例程。两种方式：查询方式和中断方式；(Program for CAN Bus receive and transmission；)
- 2013-10-06 21:27:16下载
- 积分：1
-
Flash39SF040Driver
39SF040读写操作，使用KEIL开发环境编译，此程序已测试通过。(39SF040 read and write operations, using the KEIL compiler development environment, this program has been tested.)
- 2010-12-05 15:42:37下载
- 积分：1
-
2.4TFT_C51_Pictures_showed_test_procedures
2.4寸 TFT液晶屏在C51单片机上的刷屏测试程序(2.4-inch TFT LCD screen on a single chip in the C51 test procedure Shuabing)
- 2010-07-20 18:41:05下载
- 积分：1
-
10second-AT89C51
10秒的秒表，包括程序和proteus源仿真文件。采用单片机定时功能实现时间控制并显示。(10-second stopwatch, including simulation program and source files. SCM timing functions for time control and display.)
- 2020-11-09 21:19:46下载
- 积分：1
-
18b20
基于51单片机的两路18b20温度采集，c51编程。(51 single-chip-based two-way 18b20 temperature acquisition, c51 programming.)
- 2011-10-05 09:16:05下载
- 积分：1
-
32-zhi-liu-dian-ji-tiao-shu
1、学习目的：利用定时器产生PWM，了解原理和使用方法
2、硬件要求：直流电机 定时器
3、试验现象：按键调速，PWM部分显示速度档位，电机根据档位调节速度 这个需要把电机驱动输入端和PWM端连接起来(1 Learning Objectives: To use the timer to generate PWM, to understand the principles and use, hardware requirements: DC Timer 3, the experimental phenomenon: button speed control, the PWM section shows speed gear, the motor stalls adjust the speed the motor drive input and PWM connect)
- 2012-06-27 15:03:08下载
- 积分：1
-
pscadpwm
it is used for studing pscad
- 2009-12-19 16:10:33下载
- 积分：1
-
Key
利用单片机扩展8155芯片 4*4键盘扫描 (8155 to expand the use of single-chip-chip 4* 4 keyboard scanning)
- 2008-04-11 09:54:54下载
- 积分：1
