-
这个是我写的一个液晶显示器的驱动程序，很简单，但是之得一看，对初学单片机的人来说还是有点价值的...
这个是我写的一个液晶显示器的驱动程序，很简单，但是之得一看，对初学单片机的人来说还是有点价值的-I wrote this is a liquid crystal display drivers, it is simple, but it
- 2022-02-03 07:09:00下载
- 积分：1
-
基于PIC18F2580实现定时器0程序PICC18编译器
基于pic18f2580实现的 定时器0程序
编译器为picc18-Based on pic18f2580 realize timer 0 program compiler for picc18
- 2022-08-26 13:53:14下载
- 积分：1
-
上位机是VB设置成的界面；下位机是用C编释的51单片机的温度采集模块。...
上位机是VB设置成的界面；下位机是用C编释的51单片机的温度采集模块。-VB PC are set to the interface under the C-bit machines are used for release of 51 single-chip temperature acquisition module.
- 2022-05-25 03:23:47下载
- 积分：1
-
DS18B20,我已经做过,显示正确!欢迎下载!
DS18B20,我已经做过,显示正确!欢迎下载!-DS18B20, I have already done, showing the correct! Welcome to download!
- 2022-08-08 09:32:40下载
- 积分：1
-
* Hardware architecture: PA0
* 硬件结构： PA0-5对应６个ＬＥＤ数显管的位 ，PC0-7对应各ＬＥＤ数显管的段 ，PB4-7为键盘。
* 软件描述： 上电后，时钟从00.00.00（时/分/秒）自动走时，在走时状态时 ， 按PB4（设定
* 键）超过3秒可循环选择调整时间/工作参数 ，接着按PB5以确定选择的操作 ，进入调整操作后 ，
* 按PB5选择欲调整参数，按PB6（增加键）完成调整参数操作 。按PB7，进入时控运行，PB1亮，
* 再按PB7停止时控运行，回显走时。在定时到时，PB0点亮。- * Hardware architecture: PA0-5 corresponds 6 LED numbers to reveal the tube the position, PC0-7 corresponds each LED number to reveal the tube the section, PB4-7 is a keyboard.
* Software description: After on electricity, clock from 00.00.00 (when/a minute/second) is in luck automatically, when is in luck the condition, according to PB4 (hypothesis
* The key) surpasses for 3 seconds to be possible to circulate the choice time/operational parameter, then presses PB5 by to determine the choice the operation, after enters the adjustment operation
* Wants according to the PB5 choice to adjust the parameter, (increases key) according to PB6 to complete the adjustment parameter operation.According to PB7, enters when controls the mov
- 2022-04-16 19:29:12下载
- 积分：1
-
利用8051单片机驱动H6152射频读写模块，实现对非接触式射频卡的读写操作。...
利用8051单片机驱动H6152射频读写模块，实现对非接触式射频卡的读写操作。-8051 drivers to use radio frequency reader module H6152, to realize non-contact RF card read and write operations.
- 2022-04-19 01:40:23下载
- 积分：1
-
ATmega16 procedures, controls 1602 LCD with only six I/O ports, I' ve simulat...
ATmega16程序，控制1602液晶，只用了六个I/O口，我仿真过的，没有错误，而且还带Pretues图。-ATmega16 procedures, controls 1602 LCD with only six I/O ports, I" ve simulation, there are no errors, but also with Pretues map.
- 2022-07-06 12:02:41下载
- 积分：1
-
SCM c language for beginners there are examples of useful oh
单片机c语言 初学者有用 有例子哦-SCM c language for beginners there are examples of useful oh
- 2022-11-15 08:15:03下载
- 积分：1
-
ADE7758的相关程序，包括对ADE7758的读写，以及校准程序
ADE7758的相关程序，包括对ADE7758的读写，以及校准程序-ADE7758 related procedures, including reading and writing on the ADE7758, and the calibration procedure
- 2022-08-13 03:15:04下载
- 积分：1
-
四通道的AD采样转换数据，并用于键盘和数码管的操作和显示。附有参考资料和pdf格式的原理图。...
四通道的AD采样转换数据，并用于键盘和数码管的操作和显示。附有参考资料和pdf格式的原理图。-Four-channel sampling of the AD conversion data, and for the keyboard and the operation of digital control and display. With reference materials and schematic diagram pdf format.
- 2022-01-29 00:12:38下载
- 积分：1
