-
这是我自己编写的1602和18B20的原程序！以通过实验！
这是我自己编写的1602和18B20的原程序！以通过实验！-This is what I have written the original 1602 and 18B20 procedure! Through the experiment!
- 2022-01-25 16:06:13下载
- 积分：1
-
使用MSP430控制AD9854产生任意信号
使用MSP430控制AD9854产生任意信号-MSP430 to control the use of arbitrary signals generated AD9854
- 2022-06-28 03:04:46下载
- 积分：1
-
ICC AVR6.25A ATMEGA16L芯片 LCD1602驱动程序
ICC AVR6.25A ATMEGA16L芯片 LCD1602驱动程序-ICC AVR6.25A ATMEGA16L chip LCD1602 driver
- 2022-07-11 01:12:54下载
- 积分：1
-
C code for DS1302 RTC control
C code for DS1302 RTC control
- 2022-12-14 13:25:03下载
- 积分：1
-
C8051F系列CPU，解决128K程序调试例程，用C语言编写。
C8051F系列CPU，解决128K程序调试例程，用C语言编写。-C8051F series CPU, resolve 128K program debugging routines, using C language.
- 2022-01-30 11:39:14下载
- 积分：1
-
c语言实现c51单片机PWM输出控制电机的转角
c语言实现c51单片机PWM输出控制电机的转角-c51
- 2022-08-31 16:10:03下载
- 积分：1
-
MCS
MCS-51单片机有5个中断源，其中两个是由-INT0、-INT1引脚输入的外部中断源；另外三个是内部中断源即由T0、T1的溢出引起中断和串行口发送完一个字节或接收到一个字节数据引起中断。触发外部中断有两种方式，即下降沿引起中断或低电平引起中断。当编程TCON中的ITi（i=0、1）为1时，则引起触发的方式为边沿触发方式，反之(ITi=0)为低电平触发方式。每个中断源的中断请求能否得到响应要受两级“开关”的控制，即一个总“开关”-MCS-51 single-chip has five interrupt sources, two of which are by-INT0,-INT1 pin input external interrupt source the other three internal interrupt sources from the T0, T1 overflow caused by the disruption and serial port sending or receiving end of a byte to a byte of data caused by interruption. Triggered external interrupt has two modes, namely, falling edge or low-level disruption caused disruption caused. When programming TCON in ITi (i = 0,1) for the 1:00 has been the subject of a way to trigger the way to the edge of the trigger, on the contrary (ITi = 0) for low-level trigger mode. Each interrupt source interrupt request can be subject to levels in response to
- 2023-07-06 00:00:03下载
- 积分：1
-
ARM采用的是LPC2210，液晶采用TFT的。源码为C。在SMATR2210上使用过。...
ARM采用的是LPC2210，液晶采用TFT的。源码为C。在SMATR2210上使用过。-ARM is based on LPC2210, the use of TFT LCD
- 2022-08-07 20:00:42下载
- 积分：1
-
ds1820+ 1620 precision liquid display time, temperature
ds1820+1620液精显示时间，温度-ds1820+ 1620 precision liquid display time, temperature
- 2022-03-14 10:47:41下载
- 积分：1
-
这个小实用程序有助于产生七段显示代码，为不同的我。
This small utility helps to generate seven segment display codes for different I/O connections. For example, AVR/PIC
Port A.0 -> D Segment
Port A.1 -> B Segment ....
Also it can generate Common Cathode or Common Anode table codes..
I Coded it long time ago. I Hope help someone.
Thank you
- 2022-08-02 23:48:22下载
- 积分：1
