ucos51通用板调试系统-ucos51 GM board system debugging

ddfhergklsf frsfjkerwghllfnewrge(gsrthresrgefrev ferwge grfwerg wefewr egfwe)

1.板上的8 个按键分别分别代表数字1-8，按下一个按键将结果通过串口发送到PC机上显示； 2.使用两个定时器模块，分别定时为1ms 和100ms 产生中断，使用它们分别 产生1s的定时时间，将时间分别显示到数码管上； 3.外接PS/2小键盘，将按键的值通过串口显示到PC机上。(A panel of eight key representing the number 1-8 press a key the results sent through the serial port on a PC display (2) use two timer modules, respectively, of 1ms and 100ms timer generates an interrupt, use them, respectively, Produce the timing of the 1s, the time display to the digital control External PS/2 keyboard, the key value of displayed through the serial port to a PC.)

uCgui,很好用的一个嵌入式界面程序，该文件中包含了所有的ucgui的函数介绍(uCgui, good interface with an embedded program, the file contains all of the functions introduced ucgui)

ucos 中文手册,非常完善的 ucos 的源码注解。-ucos English manual, a very sound ucos source notes.

C语言写的汉字库语言写的汉字库C语言写的汉字库.rar(C language汉字库written language written language汉字库C wrote汉字库. Rar)

uCOS-II内核移植到STC单片机的全部源代码和应用软件，基于STC5A60S2(uCOS-II kernel ported to STC microcontroller full source code and application software)

这个文件里面包含了UC/OS―II的内核源代码，对于UC/OS―II的应用很有帮助。-The document which contains the UC/OS-II kernel source code, for the UC/OS-II applications helpful.

mini2440+ucos+ucgui,多线程支持，wm支持(mini2440+ ucos+ ucgui, multi-threading support, wm support)

ucosII在DRAGONBALL MX21上的移植 开发环境为IAR (ucosII DRAGONBALL MX21 in a development environment for transplantation IAR)