-
进制转换和日期时间显示
进制转换和日期时间显示-base for the conversion and the date and time
- 2022-08-15 09:03:53下载
- 积分:1
-
QAM16编码 QAM16编码 QAM16编码 QAM16编码
QAM16编码 QAM16编码 QAM16编码 QAM16编码-QAM16编码QAM16编码QAM16编码QAM16编码QAM16编码QAM16编码QAM16编码
- 2023-07-14 10:55:03下载
- 积分:1
-
注意浮点算法
说明FPU算法和浮点运算的算法
- 2023-07-14 18:20:04下载
- 积分:1
-
good
液晶的一些内容 很实用 希望能帮厨大家 -good
- 2022-02-07 06:04:07下载
- 积分:1
-
摘要
Abstract
A new intelligent milometer base on a microcontroller can count the sum. By taking full use of the processor 89s51 and E² PROM (AT24C02) and sensor of magnetism, it can count the sum of fully distance and the course of development.
- 2022-07-04 07:25:07下载
- 积分:1
-
进入mf2k汇编语言的开发环境,将转换为BCD码的。
进入MF2K汇编语言开发环境,将二进制转换为BCD码的汇编程序设计方法与程序-Enter MF2K assembly language development environment, will be converted to BCD binary code compiled program design methods and procedures
- 2022-09-12 15:50:03下载
- 积分:1
-
数字频率调制又称频移键控(FSK),二进制频移键控记作2FSK。数字频移键控是用载波的频率来传送数字消息,即用所传送的数字消息控制载波的频率。2FSK信号便是符...
数字频率调制又称频移键控(FSK),二进制频移键控记作2FSK。数字频移键控是用载波的频率来传送数字消息,即用所传送的数字消息控制载波的频率。2FSK信号便是符号“1”对应于载频,而符号“0”对应于载频(与不同的另一载频)的已调波形,而且与之间的改变是瞬间完成的。 -Digital frequency modulation called frequency shift keying (FSK), binary frequency shift keying recorded as 2FSK. Digital frequency-shift keying is the carrier frequency to transmit digital information, that is, the number of messages transmitted with the control of the carrier frequency. 2FSK signal is the symbol of "1" corresponds to the carrier frequency, while the symbol "0" corresponds to the carrier frequency (with a different carrier frequency to another) and modulated waveform, but also between the change was instantaneous.
- 2022-08-23 09:17:39下载
- 积分:1
-
一个四程序,Python,中国多次迭代
a fouth program, python coded, Chinese segmentor
- 2023-03-05 15:50:03下载
- 积分:1
-
工作环境为:
按键采用中断方式
IIC总线接通
P0口上拉
LS244使能
接通数码管
K0:确定键,用来确定调节好的时钟或者闹钟...
工作环境为:
按键采用中断方式
IIC总线接通
P0口上拉
LS244使能
接通数码管
K0:确定键,用来确定调节好的时钟或者闹钟
K1:时钟调节键,用来选择时钟调节的位置
K2:调节键,用来使选中的数字发生改变
K3:闹钟调节键,用来选择闹钟调节的位置
接通电源后可能需要按一次K4(复位键),时钟才会开始走动,此时是一个默认的时间,使用K1来选择需要更改的数字的位置,然后按K2调节,所有的数字都调节好后按K0确定,则时钟会按照新调节好的数据开始走动。
闹钟默认为晨7点,可以通过K3+K2+K0来调节,调节方法同时钟调节。
这是一个比较完善的时钟程序,当然还可以增加许多功能,例如增加闹钟的时间段,或者使到时间后某个输出有效等等,请大家多琢磨,希望看到各位写出的程序比我的这个好。
这个试验主要是学习PCF8563的使用,但也综合了IIC总线读写、中断方式按键处理、数码管数字显示、数码管动态刷新以及内部软件定时等方面,因此是一个综合性比较强的试验。
- 2022-06-29 23:08:31下载
- 积分:1
-
控制LED慢慢变亮和慢慢变暗的一个汇编程序.初学者可以多分析一下,从而能学到一些编程方法和思路...
控制LED慢慢变亮和慢慢变暗的一个汇编程序.初学者可以多分析一下,从而能学到一些编程方法和思路-control LED change slowly and gradually darken-a compilation of the procedure. Beginners can analyze, It will be able to learn some programming methods and ideas
- 2022-07-21 23:35:03下载
- 积分:1