-
uart
uart-test 基于lpc21系列的uart-uart-test-based series of UART lpc21
- 2022-10-06 08:45:03下载
- 积分：1
-
通常我们需要将板上的Flash芯片拆下，用Flash编程器烧写固件程序；这个程序可以通过CCS运行Emu模式直接将程序烧写到flash芯片中。...
通常我们需要将板上的Flash芯片拆下，用Flash编程器烧写固件程序；这个程序可以通过CCS运行Emu模式直接将程序烧写到flash芯片中。-Usually we need to board the Flash chip removed, Programming with Flash burning device firmware procedures; This procedure can be run through the CCS model Emu directly to the process of burning flash chip.
- 2022-02-26 12:06:10下载
- 积分：1
-
ebd9200
EBD9200-I编译好的测试代码,很有参考价值-EBD9200- I compiled test code was useful
- 2022-01-26 07:20:12下载
- 积分：1
-
GTM900
GTM900-ARM(LPC2104)-LWIP1.1拨号详细介绍及源码。-GTM900-ARM (LPC2104)-LWIP1.1 dial-up detail and source code.
- 2022-05-12 19:10:18下载
- 积分：1
-
lcd的液晶显示程序，里面含有所需的头文件和工程文件
lcd的液晶显示程序，里面含有所需的头文件和工程文件-lcd liquid crystal display program, which contains the necessary header files and engineering documents
- 2022-06-17 16:07:18下载
- 积分：1
-
fgdfdsf DS图
提示：你将赚取积分（0-20）的基础上，你的产品质量
- 2022-02-14 22:01:16下载
- 积分：1
-
This example program shows how to configure and use the
A/D Converter of the fo...
This example program shows how to configure and use the
A/D Converter of the following microcontrollers:
* Philips LPC 2114/2119/2124/2129/2131/2132/2138/2194
After configuring the A/D Converter, the program reads
A/D channel 0 and outputs the converted value using the serial
port.
To run this program...
1. Select the Device (Project - Options for Target - Device)
2. Build the project (Project - Build Target)
3. Start the uVision Debugger
4. Open the Serial Window (View - Serial Window 1)
5. Click Run (F5)
6. Click on the Toolbox buttons to change input voltages
A debug script (debug.ini) creates buttons that set different
analog values in A/D channels. As the program runs, you
will see the A/D input and output change.
Other buttons create signals that generate sine wave
or sawtooth patterns as analog inputs. µ Vision3 users may
enable the built-in Logic Analyzer to view, measure and compare
these input signals grap
- 2022-01-31 01:19:45下载
- 积分：1
-
gps2参天大树
在WINCE6.0环境调试开发的ARM9-2440硬件串口通信程序，嵌入式ARM接受2串口，发送1串口数据，适时监控下位机发送的轮胎电压温度气压数据，经适时处理分析在7寸界面显示个车厢轮胎的状态信息，源码调试通过并在轻轨车上运行
- 2022-07-25 10:50:40下载
- 积分：1
-
基于STM32的三种闭环锁相环实现
基于ARM Cortex-M3内核的STM32F103RBT6处理器为核心构建柔性锁相环的硬件实验平台，在STM32中模拟出三相电源电压，并在子程序中实现了SRF-PLL、DDSRF-PLL与DSOGI-PLL三种锁相环，通过IO口并行输出锁相结果，再通过DAC转换为可观测的模拟信号。源码包中包含了软件工程与硬件电路原理图两部分。
- 2022-01-26 00:58:20下载
- 积分：1
-
TOPTESTETOP
仪
仪
仪
te
stest
te
tet
eteasdijfiajsdf
- 2022-04-30 18:17:30下载
- 积分：1
