登录
首页 » SCM » 单片机C语言编程的软件平台,使用KEILC。

单片机C语言编程的软件平台,使用KEILC。

于 2022-04-01 发布 文件大小:759.98 kB
0 91
下载积分: 2 下载次数: 1

代码说明:

单片机c语言编程软件平台keilc使用说明。-Singlechip c language programming software platform for use keilc.

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论


0 个回复

  • LCD1602底层驱动,C语言编写 ,
    LCD1602底层驱动,C语言编写 ,
    2022-08-18 02:05:04下载
    积分:1
  • 这是用AT89C2051单片机实现模数转换的源程序,程序由汇编语言编写...
    这是用AT89C2051单片机实现模数转换的源程序,程序由汇编语言编写-This is achieved using AT89C2051 mode conversion of the source, procedures prepared by the assembly language
    2022-01-31 13:06:40下载
    积分:1
  • 本系统采用MSC
    本系统采用MSC-51系列单片机ATSC51和可编程并行I/O接口芯片8255A为中心器件来设计交通灯控制器,实现了能根据实际车流量通过8051芯片的P1口设置红、绿灯燃亮时间的功能;红绿灯循环点亮,倒计时剩5秒时黄灯闪烁警示(交通灯信号通过PA口输出,显示时间直接通过8255的PC口输出至双位数码管);车辆闯红灯报警;绿灯时间可检测车流量并可通过双位数码管显示。本系统实用性强、操作简单、扩展功能强。 -The system uses MSC-51 series single-chip ATSC51 and programmable parallel I/O interface chip 8255A-centric device designed to control traffic lights, can be achieved in accordance with the actual traffic flow through the P1 port 8051 chip set red, green fuel Liang function of time traffic light cycle, the countdown five seconds left when the yellow light flashing warning (traffic lights through the PA output signal indicates the time directly through the PC port output 8255 to double-digits) vehicle alarm闯红灯 green time traffic flow can be detected through a double-digital display. The system practical, simple and strong extensions.
    2022-08-26 05:28:44下载
    积分:1
  • For some aspects of lcm06xk LCD driver code has been tested to confirm availabil...
    一段lcm06xk方面的液晶驱动代码,经过测试证实可用-For some aspects of lcm06xk LCD driver code has been tested to confirm availability
    2022-07-13 13:35:21下载
    积分:1
  • an increase ASCII.C the ASCI code (7F) for the virtual keys with serial UART to...
    增加ASCII.C的一个ASCI码(7F),用于虚拟按键用 修改UART串口的命令解析程序,修改RTC的pcf8563中断部分。 精简IIC和smart_timer代码,添加define.h的宏定义。 修改system.c里的消息堆栈的宏定义 增加ii.c函数,支持对eeprom的打包 增加由PLD或者GPIO输出的模拟UART,在6个CLOCK下速度为57.6K 增加消息的优先级功能,消息类型的前4位为消息的优先级,后4位为消息的类型 试用于初学单片机并且想更上一层楼的,或者有些基础,想减少工作量的。-an increase ASCII.C the ASCI code (7F) for the virtual keys with serial UART to amend the order analytic procedures, the revised RTC pcf8563 interruption part. IIC and smart_timer streamline code, add the definition of Acer define.h. The revised system.c news stack macros increase II.c function, support for EEPROM packaged increase from the PLD or GPIO output analog UART, in the next six CLOCK speed of 57.6K news of the priority function of the type of information before news of the four priority levels after four types of information on the trial beginner to a higher level and SCM, or some foundation, we want to reduce the workload.
    2022-03-03 16:17:03下载
    积分:1
  • 对利用595串行实现IO口扩展,本程序仅用3个IO口扩展到6个数码管...
    对利用595串行实现IO口扩展,本程序仅用3个IO口扩展到6个数码管-Realize the use of 595 serial IO port expansion, this procedure only 3 IO I extend to six digital tube
    2022-03-18 21:42:54下载
    积分:1
  • ICCAVR下的RTOS2系统
    ICCAVR下的RTOS2系统-ICCAVR system under the RTOS2
    2023-06-22 16:40:03下载
    积分:1
  • 系统源代码,C++语言编写的温度控制系统
    linux系统下的源代码,用C++语言编写的温度控制系统-linux system source code, C language prepared by the temperature control system
    2022-03-11 00:02:28下载
    积分:1
  • msp430f149读HC165(4片串联)。兼有串口发送程序
    msp430f149读HC165(4片串联)。兼有串口发送程序-msp430f149 Reading HC165 (four series). Serial sent both procedures
    2022-02-22 03:41:01下载
    积分:1
  • LT_1B msp430开发板例子程序-TA_6
    LT_1B msp430开发板例子程序-TA_6
    2022-10-22 12:05:03下载
    积分:1
  • 696518资源总数
  • 104812会员总数
  • 16今日下载