-
ARM嵌入式开发工具HITOOL.
ARM嵌入式开发工具HITOOL.-ARM Embedded Development Tools HITOOL.
- 2022-05-19 19:37:07下载
- 积分:1
-
his project was built and tested with WinAVR
his project was built and tested with WinAVR-20060125.
Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!!
To build the code, just install WinAVR and run "make" from the console in echomaster and
echoslave subdirs.
"make program" will program the device if you have a AVRISP attached.
Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock
from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST!
Otherwise you wont get any clock signal to the AVR and then you can t program it or reset
the fuses!
The MC1319x has default clock output of 32kHz so you will have to set your programmer to
a very low frequency (
- 2023-02-22 21:55:03下载
- 积分:1
-
三星S3C44B0X的一个DEMO代码,实现LCD显示时钟运行.
三星S3C44B0X的一个DEMO代码,实现LCD显示时钟运行.-a DEMO code, LCD Display clock running.
- 2022-05-29 10:56:44下载
- 积分:1
-
支持摇摆摇摆sjf2410工具,可以用来烧2闪光…
支持wiggler的sjf2410工具,可以使用wiggler来烧写2410的flash-support the wiggler sjf2410 tools, wiggler can be used to the flash of burning 2410
- 2022-08-25 14:39:25下载
- 积分:1
-
The FAT32 file system is aware of stm32 SCM, and SD card read and write operatio...
将FAT32文件系统已知道stm32单片机上,并对SD卡进行读写操作-The FAT32 file system is aware of stm32 SCM, and SD card read and write operations
- 2022-06-19 04:24:26下载
- 积分:1
-
MSP430F147读写FLASH的基本操作,想学习MSP430F147的下.
MSP430F147读写FLASH的基本操作,想学习MSP430F147的下.
-MSP430F147 the basic reading and writing operations, MSP430F147 want to learn the next.
- 2022-01-24 17:52:21下载
- 积分:1
-
路由器简单的链路层实现收发
该代码实现的是路由器收发的功能。这种功能为了实现Bacnet楼宇设备间设备而设计的。BACnet是一个为嵌入式系统实现的BACnet (楼宇自动化和控制网络)专门协议。 BACnet本身就是一个标准的路由协议设计用于处理通信自动化的建筑,如空调系统和其他暖通设备。楼宇自动控制网络数据通讯协议(即: A Data Communication Protocol for Building Automation and Control Networks,简称《BACnet协议》)由美国暖通、空调和制冷工程师协会(ASHRAE ) 组织的 标准项目委员会135P (Stand Project Committee即SPC 135P)历经八年半时间开发的。
- 2022-01-28 10:44:57下载
- 积分:1
-
Zhou Ligong LPC213X ARM7 prepared for the SD card reader module, a very detailed...
周立功公司为LPC213X ARM7 编写的SD卡读写模块,很详细的注释。-Zhou Ligong LPC213X ARM7 prepared for the SD card reader module, a very detailed notes.
- 2022-12-24 09:25:03下载
- 积分:1
-
该代码是FM1702芯片的驱动程序源代码,已经测试通过,可以放心参考。...
该代码是FM1702芯片的驱动程序源代码,已经测试通过,可以放心参考。-The code is the FM1702 chip driver source code, has been tested, you can rest assured reference.
- 2022-10-30 03:05:07下载
- 积分:1
-
ucgui that porting to 2410 processor
ucgui that porting to 2410 processor
- 2023-04-12 04:25:03下载
- 积分:1