-
data
针对室内麦克风阵列仿真信号的产生，有混响，可以添加任意角度的噪声。(For indoor microphone array simulation signal generation, reverberation, can add any angle noise.)
- 2018-07-12 16:21:27下载
- 积分：1
-
跳转到QQ聊天类库
说明： 跳转到QQ聊天类库 易语言编写 JSON操作类库，个人测试使用，完整类库(Jump to QQ Chat Library)
- 2019-01-05 08:48:41下载
- 积分：1
-
mmnbvtrhgfhfgh
mmnbvtrhgfhfgh
- 2022-02-03 20:58:07下载
- 积分：1
-
CH11-KEA128-SPI
1. 硬件接线
（1）调试串口(UART_Debug)使用UART2，在“printf.h”文件中宏定义， 对应引脚为TX-PTD7，RX-PTD6
（在“uart.h文件中宏定义）。
（2）灯0~3（LIGHT_0~LIGHT_3）对应的引脚是PTC0~PTC3，高电平点亮（由硬件接法决定）
（3）SPI0_CLK对应的引脚是PTE0， SPI0_MOSI对应的引脚是PTE1，
SPI0_MISO对应的引脚是PTE2，SPI0_PCS对应的引脚是PTE3，
SPI1_CLK对应的引脚是PTG4， SPI1_MOSI对应的引脚是PTG5，
SPI1_MISO对应的引脚是PTG6，SPI1_PCS对应的引脚是PTG7。
（4）SPI0作为master,SPI1作为slave，SPI1接收SPI0发送的数据并产生中断。
用导线将PTE0与PTG4对接，将PTE1与PTG5对接，将PTE2与PTG6对接，将PTE3与PTG7对接。(1. Hardware wiring
(1) Debugging Serial Port (UART_Debug) uses UART2, macro-defined in "printf.h" file, corresponding pins are TX-PTD7, RX-PTD6.
(macro definition in the uart.h file).
(2) The pins corresponding to the lamp 0~3 (LIGHT_0~LIGHT_3) are PTC0~PTC3, and the high-level lighting is determined by the hardware connection.
(3) The pin corresponding to SPI0_CLK is PTE0, and the pin corresponding to SPI0_MOSI is PTE1.
The pin corresponding to SPI0_MISO is PTE2, and the pin corresponding to SPI0_PCS is PTE3.
The pin corresponding to SPI1_CLK is PTG4, and the pin corresponding to SPI1_MOSI is PTG5.
The pin corresponding to SPI1_MISO is PTG6, and the pin corresponding to SPI1_PCS is PTG7.
(4) SPI0 acts as master and SPI1 acts as slave. SPI1 receives data sent by SPI0 and generates interruption.
PTE0 and PTG4 are docked by wire, PTE1 and PTG5 are docked, PTE2 and PTG6 are docked, PTE3 and PTG7 are docked.)
- 2020-06-16 12:00:01下载
- 积分：1
-
displacement
有n个整数，使其前面各数顺序向后移m个位置，最后m个数变成最前面的m个数
(There are n integers, the number of its previous order of the backward shift m positions, the last m number of m into the number of front
)
- 2010-05-28 16:31:42下载
- 积分：1
-
CHE_SF5-8
同步电机 FOC矢量控制,基于TMS2808芯片
完整源码,电机正常运行(MOTOR,FOC,VC,TMS320F2808)
- 2021-04-27 13:28:45下载
- 积分：1
-
windriver-cert-hypervisor-design
windriver cert hypervisor设计总结(windriver cert hypervisor Design Summary)
- 2011-05-26 18:49:45下载
- 积分：1
-
38LCDtupianxianshi
51单片机 TFT屏显示利用ucgui实现的(51 single-chip TFT screen display used to achieve ucgui)
- 2011-09-19 15:58:48下载
- 积分：1
-
Fonts software can generate batch and can adjust the size of Fonts
字模软件可以批量生成并且可以调节字模大小-Fonts software can generate batch and can adjust the size of Fonts
- 2022-04-13 06:33:24下载
- 积分：1
-
用opencv写的hog特征 opencv3.2
主要用opencv写的hog特征，利用opencv自带的svm训练，去寻找图像中行人的数目，并用矩形表示出来(Mainly use the hog feature written by opencv, and use the SVM training provided by opencv to find the number of pedestrians in the image and represent it by rectangle)
- 2020-06-23 02:40:01下载
- 积分：1
