-
Wireless_interface_using_MSP430
基于TI的MSP430处理器控制CC1100-CC2500射频芯片的代码，包括发送和接受端，使用IAR开发环境。(Based on TI' s MSP430 processor controlled radio frequency chip CC1100-CC2500 code, including the sending and the receiving end, the use of IAR development environment.)
- 2009-05-20 17:16:09下载
- 积分：1
-
wififLCD_Gui1
STM8L052 的LCD段码驱动显示程序。STM8的LCD驱动器驱动比较复杂，没有规律，显示段码8，需要每位对应，本程序使用三个数组和很小的程序实现段码显示。减少了程序量，提高了效率。(LCD Segment drive STM8L052 display program. STM8 LCD driver drive more complex, there is no law, code display section 8, each corresponding to the needs, the program uses three arrays and procedures to achieve a small segment display. Reduction program, improving the efficiency.)
- 2015-09-29 10:52:07下载
- 积分：1
-
A7159-SPI-stm8
A7159-SPI的驱动程序例程，非常值得你拥有(A7159- SPI driver routines, very worth you have)
- 2016-12-24 11:46:40下载
- 积分：1
-
ds1302
ds1302液晶时钟液晶时钟及温度检测程序(the ds1302 LCD Clock LCD Clock and temperature testing procedures)
- 2012-05-06 13:21:39下载
- 积分：1
-
smsniff
简单的小程序简单的小程序简单的小程序简单的小程序(Simple small programSimple small programSimple small programSimple small program)
- 2015-06-16 09:00:32下载
- 积分：1
-
STM32_KS103_IIC
0.我使用的是F103VET6，但软件IIC原理都是一样的，改引脚配置后可方便移植
1.连接引脚前，可以只连接VCC和GND查看模块当前地址：模块上的LED指示灯会渐亮，然后就是快闪(1)和慢闪(0)，将值记录下来，用计算器转换一下就是当前的地址值了(0. I use F103VET6, but the principle of software IIC is the same, pin configuration can be easily transplanted.
1. Before connecting pins, you can only connect VCC and GND to view the current address of the module: the LED light on the module will gradually light up, then flash (1) and slow flash (0), record the value, and convert it with a calculator to the current address value.)
- 2020-06-19 11:20:02下载
- 积分：1
-
add_shot_reel
加卷头小程序：对单炮地震数据加卷头：add reel for single shot (add reel for single shot )
- 2014-01-29 19:46:27下载
- 积分：1
-
串口控制舵机
说明： 串口控制舵机，可以任意输入角度然后根据串口输入的角度旋转(Serial port control steering gear)
- 2020-06-19 09:20:01下载
- 积分：1
-
LCD_Driver-STM32
STM32直接驱动段式液晶屏，程序已调试通过，有完整的原理图说明及原理图，希望对各位有用。(STM32 direct drive Segment LCD screen, program debugging through a complete schematic description and schematic, want to be useful.)
- 2020-08-25 11:08:15下载
- 积分：1
-
LIN6-i0P9999-int
PIC18F2420 用中断方式从0加到9999 采用四位工阳极数码管(PIC18F2420 interrupt from 0 added to the 9999 four workers anode digital tube)
- 2012-09-05 15:24:02下载
- 积分：1
