登录
首页 » C++ » ARM7自学ppt

ARM7自学ppt

于 2018-05-14 发布 文件大小:23114KB
0 99
下载积分: 1 下载次数: 2

代码说明:

  本文件包含7章理论学习和4章手动实验,内容涉及SPI协议,动态扫描,串口传输,电机控制等(This document contains 7 chapters of theoretical learning and 4 chapter manual experiments, involving SPI protocol, dynamic scanning, serial port transmission, motor control and so on.)

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • HTMJ
    基于STC 51单片机做的灭菌器,传感器PT100,PID控温,滑动平均算法处理等包含eeprom底层程序(STC5620AD include PID and eeprom)
    2013-01-09 11:58:37下载
    积分:1
  • FreeRTOS实验17-1 FreeRTOS内存管理实验
    硬件资源: 1,DS0(连接在PA8),DS1(连接在PD2上) 2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面) 3,ALIENTEK 2.8/3.5/4.3寸LCD模块(仅支持MCU屏) 4,按键KEY0(PC5)/KEY1(PA15)/KEY_UP(PA0,也称之为WK_UP) 实验现象: 按下KEY_UP键申请内存,内存申请成功以后就可以使用了,按下KEY0键 就是使用申请到的内存。当内存使用完成以后就可以按KEY1键将内存 释放掉。(Hardware resources: 1, DS0 (connected to PA8), DS1 (connected to PD2) 2. Serial port 1 (baud rate: 115200, PA9/PA10 connected on board USB to serial chip CH340) 3, ALIENTEK 2.8/3.5/4.3 inch LCD module (only supporting MCU screen) 4. Keyboard KEY0 (PC5)/KEY1 (PA15)/KEY_UP (PA0, also known as WK_UP) Experimental phenomena: Press KEY_UP key to apply for memory, memory application can be used after success, press KEY0 key That is to use the applied memory. When the use of memory is complete, you can press KEY1 to store the memory. Release.)
    2020-06-24 06:00:02下载
    积分:1
  • 基于W5500 的IAP
    基于STM32单片机,通过W5500以太网芯片下载APP的IAP程序,实测正常使用。(Based on the STM32 microcontroller, download the APP IAP program through the W5500 Ethernet chip, and measure the normal usage.)
    2021-03-26 10:49:13下载
    积分:1
  • UARTX_DMA_Recv
    LPC1788单片机的DMA调试程序,实现串口DMA功能例程(DMA debug program for PC1788, DMA to serial port function routines)
    2014-04-11 09:56:31下载
    积分:1
  • STC15F104W模拟串口实现自动下载
    说明:  STC15F104W模拟串口实现自动下载(Stc15f104w analog serial port realizes automatic download)
    2020-04-27 14:38:58下载
    积分:1
  • AT24C256
    AT24C256的读写程序,单片机使用ATmega16,同时在LCD上显示(AT24C256 literacy program, MCU ATmega16, simultaneously displayed on the LCD)
    2015-03-23 09:52:55下载
    积分:1
  • PID控制算法的C语言实现(完整版)
    各种PID算法 包括位置型PID 增量型PID 积分分离PID,抗积分饱和PID等(Various PID algorithms include location PID incremental PID integral PID separation PID, anti-integral saturation PID and so on)
    2020-12-07 09:39:21下载
    积分:1
  • T0_led
    定时器实现开发板上面的led等熄灭2s,亮1s(T0)
    2010-05-27 11:04:42下载
    积分:1
  • lcdceshi.zip
    代码测试环境:JME-2核心板+1T指令周期的STC单片机(51内核STC12LE5A60S2)+33M晶振 单片机工作电压3.3V 程序默认IO连接方式: 控制线:RS-P3^5 WR-P3^6 RD-P3^7 CS-P1^0 REST-P1^2 数据线: DB0-DB7依次连接P0^0-P0^7 DB8-DB15依次连接P2^0-P2^7 (8位模式下DB0-DB7可以不连接) 触摸功能连接方式:(不使用触摸可不连接) D_CLK-P1^7 D_CS-P1^4 D_DIN-P3^0 D_OUT-P3^1 D_PENIRQ-P3^4 ( Code test environment: JME-2 core board+ 1T STC microcontroller instruction cycles (51 core STC12LE5A60S2)+ 33M crystal oscillator operating voltage of 3.3V microcontroller IO program default connection mode: Control line: RS-P3 ^ 5 WR-P3 ^ 6 RD-P3 ^ 7 CS-P1 ^ 0 REST-P1 ^ 2 Data line: DB0-DB7 in turn connected P0 ^ 0-P0 ^ 7 DB8-DB15 turn connected P2 ^ 0-P2 ^ 7 (8-bit mode can not connect DB0-DB7) :( Not touch function connections may not be connected using the touch) D_CLK-P1 ^ 7 D_CS-P1 ^ 4 D_DIN-P3 ^ 0 D_OUT-P3 ^ 1 D_PENIRQ-P3 ^ 4 )
    2015-08-23 20:55:27下载
    积分:1
  • SDP810
    说明:  传感器驱动代码,温差式压力传感器,用来测量气体流量(Sensor drive code, temperature differential pressure sensor for measuring gas flow)
    2019-03-21 22:10:43下载
    积分:1
  • 696518资源总数
  • 104353会员总数
  • 66今日下载