登录
首页 » DOS » fenzhan

fenzhan

于 2013-05-24 发布 文件大小:2KB
0 154
下载积分: 1 下载次数: 1

代码说明:

  基于MAX485的多机通信分站程序,分站同AT89C2051实现了可以编译通过(MAX485-based multiprocessor communication sub-station program, sub-stations can be achieved with AT89C2051 compiled by)

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • UART1602
    说明:  51单片机用1602液晶显示串口接收到的数据(51 1602 MCU with LCD serial data received)
    2021-03-21 14:29:17下载
    积分:1
  • isd1760dingdianlufang
    通过单片机实现按键对语音芯片isd1760的定点录、放、清除操作,并用一个数码管显示操作的区段,文件夹中最终语音文本为调试通过程序,保证能用(Through the single chip microcomputer key to speech chip isd1760 pointing to record, put, clear operation, and a digital tube display operation section, debugging through the procedure, guaranteed to last )
    2012-12-06 11:03:05下载
    积分:1
  • STM32-IIC-Master-Slaver
    STM32 I2C做从机通信 实现主机和从机之间数据互传
    2021-04-06 11:09:02下载
    积分:1
  • acetar
    Contiene el inicio de una ventana
    2015-02-23 00:56:43下载
    积分:1
  • stm32_I2C1602完整驱动程序
    说明:  stm32_I2C1602完整驱动程序, 程序能运行,有兴趣的可以看看。(stm32_ I2c1602 complete driver, the program can run, interested can see.)
    2020-12-22 16:03:45下载
    积分:1
  • tps61165DBTR
    TPS61165DBTR High Brightness White LED Driver Description: MSP430通过P1.1与TPS61165相连接,向CTRL输入2个字节控制TPS61165 调节LED灯组亮度。第一个字节为地址0x72,第二个字节后5位为控制位范围0x00-0x1f。 TPS61165还提供PWM模式,此程序不包含此模式,仅供EasyScale测试使用。 ACLK = n/a, MCLK = SMCLK = BRCLK = default DCO = ~1.045MHz(TPS61165DBTR High Brightness White LED Driver Description: MSP430 via P1.1 connected with the TPS61165 to the CTRL input two-byte Control TPS61165 adjustable brightness of the LED array. The first byte of address 0x72, second byte 5 bits for the control range 0x00-0x1f. TPS61165 also provides PWM mode, this program does not contain this mode, only EasyScale testing. ACLK = n/a, MCLK = SMCLK = BRCLK = default DCO = ~ 1.045MHz)
    2013-07-31 00:10:13下载
    积分:1
  • temp
    组态王在实际应用中,温度测量与报警控制程序设计(Kingview in practical application, temperature measurement and alarm control program design)
    2020-12-04 14:19:25下载
    积分:1
  • template
    stm32配置模板,了解 STM32 的标准库文件之后,我们就可以使用它来建立工程了,因为用库新建工程的步骤较多,我们一般是使用库建立一个空的工程,作为工程模板。以后直接复制一份工程模板,在它之上进行开发(Once you understand the standard library file for STM32, we can use it to build the project because of the new library build There are more steps, and we usually use the library to build an empty project as an engineering template. Direct a copy of the work later The process template is developed on top of it)
    2017-09-17 13:40:25下载
    积分:1
  • 2553控制步进电
    msp430g2553按键控制步进电机正反转,加速,启动停止(2553 Control Stepping Motor)
    2020-06-20 23:00:01下载
    积分:1
  • 实验13 TFT LCD显示实验
    基于正点原子STM32F407的LCD显示实验(LCD Display Based on Positive Atom STM32F407 Explorer Platform)
    2020-06-23 04:40:02下载
    积分:1
  • 696518资源总数
  • 106222会员总数
  • 14今日下载