▍1. Naomi
串口与NANDflash的应用与设计希望代码对你们有帮助(UART NANDFLASH)
舵機控制,控制舵機的正轉和反轉,mcu直接驅動(Steering control, steering control switch to reverse the positive)
说明: 多点触摸,51例程。车载多媒体、数码产品上用(Multi-touch, 51 routines. Car multimedia, digital products with)
说明: 这是一个SD卡的FAT文件系统的实现,该版本时针对周立功的LM3S8962开发板的,可以修改里边相应管脚的设置应用到其他的板子上;该程序也能在51单片机上成功运行。(This is an SD card FAT file system implementation, the version developed for Zhou, who' s LM3S8962 board, you can modify the settings inside the corresponding pins on the board applied to the other the program can run successfully on the 51 single.)
LPC2103-IAR例程,NXPLPC2103 arm7处理器实验代码(LPC2103-IAR routines, NXPLPC2103 arm7 processor test code)
一块TFT屏幕的驱动程序,包括管脚的定义以及纵横方向的延展,但是没有具体的数据cmd,需要的拿走(A driver for TFT)
STM32通用9325测试程序,初始化,刷屏等(Common test procedures STM32 9325)
AVR 8位数码管动态显示 包括原代码及protues仿真 很有意思(AVR 8-bit digital displays, including dynamic simulation of the original code and very interesting protues)
routines to manage by polling a serial (RS232) node Modbus RTU slave. The microcontroller on which it was implemented is LPC1768. The routine for performing the CRC16 checksum is very small and very fast. MODBUS-SLAVE is complete. VERY INTERESTING.
流明ARM开发板看门狗示例程序,可以直接在IAR编译器上运行使用。(Lumens ARM development board watchdog example program, can direct IAR compilers run use.)
this project is for using spi port in NXP philips arm microcontrollers
LM3S系列开发板开发的串口与网络转换的原理图以及程序。嵌入式开发需要的资料。(LM3S series development board to convert the serial port of the network diagram, and procedures. Embedded developers need.)
ALIENTEK MINI STM32 独立看门狗程序(ALIENTEK MINI STM32 independent watchdog program)
通过STM32的USB实现对SD卡和内部Flash,Nandflash的读写(access to the internal flash,SD card,and Nand flash using stm32)
MC9S12DG128各模块应用程序,包括SPI、SCI、CAN、定时器、中断、IO操作等。开发环境Codewarrior4.6(MC9S12DG128 each module applications, including SPI, SCI, CAN, timers, interrupts, IO operations, etc.)
基于stm32的TFT示波器 ADC采集,DMA传输,实现在TFT上的波形显示(stm32 TFT oscilloscope)