▍1. LP1114_ucos_ii
LP1114_ucos_ii,cm0处理器移植ucosii的模板(LP1114_ucos_ii, cm0 template processor transplant ucosii)
LP1114_ucos_ii,cm0处理器移植ucosii的模板(LP1114_ucos_ii, cm0 template processor transplant ucosii)
基于STM32的火灾报警系统,可以测试瓦斯等可燃气体浓度并短信通知。 (Fire alarm system based STM32)
将ucos-ii移植到vc++6.0上,包含ucos-ii源码和移植源代码(The ucos-ii transplanted to vc++ 6.0, contains ucos-ii Source and portable source code)
UC1601S显示测试与初始化,可用于对UC1601开发评估(UC1601S testing and initialization can be used for assessment UC1601 development)
STM32F103驱动蜂鸣器的例子,是学习STM32的好资料。(STM32F103 drive the buzzer example, STM32 learning good information.)
压缩包中有基于ucos系统下的常用程序,有tim捕获,串口查询,串口中断,定时器中断,温度读取。(Compressed package based on common procedures under ucos system, there are tim capture, serial query, the serial port interrupt, timer interrupt, temperature reading.)
已经在STM32f103zet6上移植了的uCOSII系统,亲测可用版本是2.91(STM32f103zet6 system has been transplanted on the uCOSII, pro test available version is 2.91)
NXP LPC1788采用U盘USB_HOST实现程序升级代码,带UCOS操作系统。(NXP LPC1788 using U disk USB_HOST procedures to achieve the upgrade code, operating system with UCOS. )
提出了一种基于UCOS和UCGUI的数字存储示波器的软件时序逻辑状态机实现技术,硬件上采用FPGA+ARM的 结构,充分利用FPGA在逻辑控制、高速信号采集方面的优势,以及ARM核心在LCD波形刷新、人机接口以及通信协议处 理的灵活性,在提高系统整体性能和可靠性的同时简化了系统的软件和硬件结构。(UCOS proposed based digital storage oscilloscope and UCGUI software sequential logic state machine technology, the use of FPGA+ ARM hardware Structure, full use of the advantages of FPGA logic control, high-speed signal acquisition aspects, as well as ARM core in the LCD waveform refresh at the man-machine interface and communication protocols Reasonable flexibility in improving overall system performance and reliability while simplifying the software and hardware architecture of the system.)
飞思卡尔的cotex M0系列芯片的ucos-ii移植(Freescale cotex M0 series chips ucos-ii transplant)
uCOS+uCGUI程序 实时操作系统ucos(uCOS+uCGUI program ucos real-time operating system)
UCOS的移植参考文献,详细讲解了UCOS在windows平台上的移植过程。(UCOS transplant references, explained in detail on the windows platform UCOS transplant process.)
UCOS的移植参考文献,详细讲解了UCOS在windows平台上的移植过程。(UCOS transplant references, explained in detail on the windows platform UCOS transplant process.)
uCOS-III+em5.22+VS2010的移植,包含了官光的GUI例子(uCOS-III em5.22 VS2010)
uCOS-III+em5.22+VS2010的移植,包含了官光的GUI例子(uCOS-III em5.22 VS2010)
零死角玩转stm32-系统篇1、uCOS-II 移植与深入实战指南(Zero dead Fun stm32-System Part 1, uCOS-II transplantation and in-depth practical guide)
零死角玩转stm32-系统篇1、uCOS-II 移植与深入实战指南(Zero dead Fun stm32-System Part 1, uCOS-II transplantation and in-depth practical guide)
ucos系统移植所需要的的齐全安装包,初学者用,附有教程(system transplantation about ucos)
UCGUI实际的性能由许多因素决定, 如处理器/编译器/内存模 式/优化程度/配置/LCD 控制器连接方式等. UCGUI 在典型目标系统上的 性能测试参数和资源占用的分析报告, 通过报告你也可以获知在其它大部分目标系统上 情况(UCGUI actual performance is determined by many factors, such as the processor/compiler/memory mode/optimize the degree/configuration/LCD controller connection. UCGUI typical target system performance test parameters and resource consumption analysis report by report You can also be informed of the situation in most of the other on the target system)
网上有很多关于ucos移植到c51的资料,但基本都没有调试文档,让很多有心去了解ucos的人走不少弯路,现在附上本人在STC89C516RD+成功运行的版本,其实主要的移植部分都没有改动,主要是说说自己的心得,另附上ucos源代码注释文档以及keil C51的详细设置文档(There are many online about the ucos transplantation information to c51, but basically no debugging document, so a lot of interest in understanding ucos take many detours, now attach I successfully run in STC89C516RD+, version, in fact, a major part of the transplant are not changed mainly talk about my own experience, attached on ucos source code comment documentation, and detailed settings document keil C51)